FLEXIBLE
ENGINEER GRADE
REFLECTIVE TAPE
for VEHICLES

Flexible Engineer Grade Reflective Tape Identi-Tape Logo
FLEXIBLE ENGINEER GRADE REFLECTIVE TAPE - is a Type I retro-reflective adhesive tape that is flexible and conformable.  It is used on EMS vehicles, fire apparatus (trucks), and other vehicles that may have compound curves, rivits, diamond plate, etc.  It also is well-suited for signs.  It has 169% elongation so will not part when the underlying metal expands under the heat of the sun.  It has a performance life of 7 years.  Flexible Engineer grade reflective tape utilizes embedded microscopic glass beadlets to reflect light.  It is thin (5.5 mils), conformable, and has a permanent acrylic adhesive.  Tape should be applied when it and the substrate are both within a temperature range of 59F to 77F, but it is service rated from -22ºF to 176ºF.  To maximize longevity, the adhesive should be allowed to cure 48 hours before being put into service.  The brightest reflecting color is white, followed by yellow, then red.  Multiples of 15' increments will be sent as continuous lengths.  Engineer grade carries no "star" watermark like super-engineer grade has.

Type I Flexible Engineer Grade Reflective Tapes (no star watermark)
(for enhanced night time vehicle conspicuity)
Approximate Color Color Sizes Price per
Length
Product
I.D.
View Cart
Reset Page
Add All to Cart
  White 1" x 150' $32.00
now $25.60
srR1w Qty:
2" x 150' $58.00
now $46.40
srR2w Qty:
4" x 150' $109.00
now $87.20
srR4w Qty:
6" x 150' $144.00 srR6w Qty:
(allow 7 days to ship)
  Yellow
(for NFPA 1901
fire apparatus)
*
4" x 150' $109.00 srR4y Qty:
6" x 150' $144.00 srR6y (out)
(allow 7 days to ship)
4" x 150' $109.00 srR4o Qty:
(allow 7 days to ship)
6" x 150' $144.00 srR6o Qty:
(allow 7 days to ship)
  Red
(for NFPA 1901
fire apparatus)
*
4" x 150' $109.00
now $87.20
srR4r Qty:
6" x 150' $144.00 srR6r Qty:
(allow 7 days to ship)
Return to Main Product Menu Top Arrow
Top
Add All to Cart
Reset Page
View Cart
Fire Apparatus Tape
Rollover to EnlargeFire Apparatus Reflective Chevron Tape
Back of EMS Vehicle with 6" Wide Stripes
*NFPA 1901:  Following are excerpts from the National Fire Protection Agency's 2009 NFPA 1901 Standard for Automotive Apparatus (fire trucks):

"15.9.3.2:  At least 50% of the rear vertical surfaces of the apparatus shall be equipped with a minimum 4 inch wide alternating yellow and red chevron retro-reflective striping sloping downward and away from the centerline of the vehicle at an angle of 45 degrees."

"15.9.3.3:  All retro-reflective material required by 15.9.3.1 and 15.9.3.2 shall conform to the requirements of ASTM D 4956, Standard Specification for Retro-reflective Sheeting for Traffic Control, Type I or better."