|
|
|
Sew-on Reflective FabricThese high quality reflective fabric tapes are manufactured in China. Their quality rivals 3M material in reflectivity and durability, but at lower cost. They are for safety vests, coveralls, jackets, and uniforms worn by road & utility workers, equipment operators, miners, and other professions where conspicuous visibility is essential to safety. The reflective surfaces of these trims are of the enclosed lens, glass bead type. These are ANSI (American National Standards Institute) Level 2 certified. Our top-selling regular silver-gray reflective fabric trim below is 35% cotton & 65% polyester.
|
| Photo |
Description |
Size |
Price per Roll |
Product
I.D. |
Reflective Fabric Under Flash
Reflective Fabric in Daylight |
High Quality Import
REFLECTIVE FABRIC
Silver-Gray
500+ Cd/Lux/sq.m.
for middle to heavyweight fabrics
Home Wash Rated:
50 cycles at 140ºF
Dry Clean: 30 Cycles
Certifications:
ANSI / ISEA
CAN / CSA
EN ISO 20471 |
1" x 100-m
(328 feet) |
$59.00 |
srfR1sv
|
2" x 100-m
(328 feet) |
$115.00
-5% @ 5 rolls
-10% @ 10 rolls |
srfR2sv |
Flame Resistant Reflective FabricFLAME RESISTANT SEW-ON REFLECTIVE FABRIC (Imported) - These top quality flame resistant reflective fabric tapes are for application to oilfield worker's, linemen's, and welder's coveralls and protective clothing that is exposed to flames or arcing. It is rated for 50 industrial wash cycles at 185ºF, or 50 dry-cleaning cycles. Under home wash conditions, it is rated for 100 cycles at 140ºF. Material is 100% FR treated cotton and is 18 mils thick. Best on middle to heavyweight fabrics. Free samples of these available upon request.
|
Flame Resistant
Reflective Fabric |
Flame Resistant
REFLECTIVE FABRIC
Silver-Gray
500+ Cd/Lux/sq.m.
Industrial Wash Rated:
50 cycles at 185ºF
Dry Clean: 100 cycles
Certifications:
ANSI / ISEA
CAN / CSA
EN ISO 20471
NFPA
CAN / CGSB
|
2" x 50-meter
(164 feet) |
$112.00/roll |
srfFRH2sv |
Reflective Flame Resistant Firecoat TrimFLAME RESISTANT SEW-ON TRIM (aka Bunker Coat Trim) - Fluorescent Yellow or Orange with a 3/4" silver reflective stripe, these top quality flame resistant reflective trims are for application to firefighter's bunker coats, welder's and oilfield worker's coveralls, and other clothing that might be exposed to flames or arcing. Material is 17 mils (0.017") thick and backing is 100% FR treated cotton. Wash durability is 50 cycles at 60C (140F) and medium tumble dry temperature, or 30 dry-cleaning cycles. Best on middle to heavyweight fabrics.
|
Flame Resistant Reflective Fire Coat Trim
| Flame Resistant
"Triple Trim"
3/4" Reflective Silver
on Fluorescent
Yellow or Orange
Home Wash Rated:
50 cycles at 140ºF
Dry Clean: 30 Cycles
Certifications:
EN 469
EN ISO 20471 |
2" x 50-m
(164 feet) |
$149.00
less 5% for 10 rolls |
Fluorescent
Yellow
srfFRH2sv-FY |
2" x 50-m
(164 feet) |
$149.00
less 5% for 10 rolls |
Fluorescent
Orange
srfFRH2sv-FO |
Reflective Safety Vest TrimSEW-ON REFLECTIVE SAFETY VEST TRIM (aka Triple-Trim) - A great quality equivalent to 3M's 8471 and 8472 reflective vest trim for less than half the cost. Reflective vest triple-trim is a light-weight polyester trim for safety vests worn by flagmen, construction, and utility workers. This material has a 5/8 inch wide reflective stripe heat-applied to a 6-mil thick, fluorescent polyester fabric. This safety vest triple-trim are good for a minimum of 40 home wash (104 F°) and medium-temp drying cycles with only a nominal loss of performance. Approved to EN ISO 20471:2013, ANSI-ISEA 107 Level 2.
|
 |
Triple Trim
Reflective Vest Trim
Reflective Stripe on
Fluorescent Yellow-Lime |
1-1/2" x 100-yd |
$66.00
less 5% for 5 rolls
less 10% for 10 rolls |
srtR1.5sv-fy |
Triple Trim
Reflective Vest Trim
Reflective Stripe on
Fluorescent Yellow-Lime |
2" x 100-yd |
$88.00
less 5% for 5 rolls
less 10% for 10 rolls |
srtR2sv-fy |
Triple Trim
Reflective Vest Trim
Reflective Stripe on
Fluorescent Orange |
2" x 100-yd |
$88.00
less 5% for 5 rolls
less 10% for 10 rolls |
srtR2sv-fo |
|
To place an order, go to
|
Top
|
|
